Dracaena CPU liquid cooler adopts the design of separate pump head to form a high-efficiency direct current. Make the heat absorption and discharge more fully, and improve the heat dissipation efficiency.Heat is generated inside the computer tower by various hardware such as CPU, video card or even the hard drive. The objective of cooling is to maintain an optimal operating temperature and this can be achieved through various methods including the introduction of heat sinks and fans. In computers, water cooling is a method used to lower the temperatures of computer processors, and sometimes other components such as graphics cards, using water rather than air as the cooling medium.The heat from the water in the radiator dissipates into the air surrounding the computer. Using liquid cooling is generally safe if it's done properly. There are many cases where some users have damaged their parts, especially the GPU, CPU, and motherboard, because of leaks. Exposed to liquids, while the PC is running, will instantly damage these parts.WATER BLOCK: Aluminum housing embedded ambient light effect Micro Water Channel Design: Greatly enhances the effective heat dissipation area of the water cooling row and provides a lot of space for air flow. Independent Pump Design: Pump divided from the pump head,effectively improve the efficiency of heat dissipation. 

• High flow water pump to improve the efficiency of heat dissipation.The pump RPM: 1800 RPM±10%,higher than usual 120 AIO water cooling system
• New water block design help to isolate the pump from heat to prolong all in one liquid cooler 120mm lifetime
• One PWM Fan: The speed of the PWM fan can be auto adjusted accordingly to cpu temperature, provide the better airflow and lower noise.
• (Note: The PWM mode must be set in BIOS setting before cpu liquid cooling system 120mm operation, otherwise the fan will run at a fixed speed of full speed or low speed)
• Better cpu liquid cooling system Performance: With a more efficient cold plate, spraying copper bottom, proprietary pump and fans optimized for static pressure to make sure the excellent heat transfer from cpu.
• Intel TDP 180W: LGA115X/ LGA1200/ LGA1366/LGA1700/ LGA2011/ LGA2011-V3 Core i3/i5/i9 Pentium Celeron
• AMD TDP 180W: AM4, AM3, AM2+, AM2, FM2+, FM2, FM1, Ryzen R3/R5/R7 APU A4/A6/A8/A10/A12 FX 4/6/8- core Phenom II X2/X3/X4/X6 AthlonII X2/X3/X4 Athlon X4